Content
Dateianzeige für rsnapshot (1.6.7)
usr/share/doc/rsnapshot/changes.txt1.6.7 stable 2024-04-01
----------------------------------------------
* Changed paths from /[s]bin/ to /usr/[s]bin/
1.6.6 stable 2023-04-06
----------------------------------------------
! Changed behaviour of grep: "warning: stray \ before ..."
1.6.5 stable 2023-01-07
----------------------------------------------
* Updated to rsnapshot 1.4.5
with sysconfdir=/etc
1.6.4 stable 2022-06-16
----------------------------------------------
* Changed status to stable
1.6.3 stable 2022-06-09
----------------------------------------------
! Fixed position of execution of post commands
1.6.2 stable 2022-06-08
----------------------------------------------
! Abort rsnapshot backup if pre command fails
+ Added pre and post commands executed by rsnapshot
itself (cmd_preexec and cmd_postexec in rsnapshot.conf)
* Hide configuration options of inactive backups
* Execution of post commands in inverse sequence
* Changed status to testing
1.6.1 stable 2022-05-28
----------------------------------------------
! Fixed typo in logical statement ($$ to &&)
1.6.0 stable 2022-05-28
----------------------------------------------
! Mount only if backup is active
+ Added pre and post commands
1.5.3 stable 2021-07-25
----------------------------------------------
! Added --nomail option to /var/install/bin/rsnapshot
and /var/install/bin/rsnapshot-check avoiding that
check results are sent per mail instead of showing
them on screen
1.5.2 stable 2021-07-24
----------------------------------------------
* Updated to rsnapshot 1.4.4
with sysconfdir=/etc
+ Added my patches to rsnapreport.pl
- Divide by 1048576 to get file sizes MB
- Format of file sizes changed to three decimal digits
- Fixed detection of rsync command line
1.5.1 stable 2020-02-15
----------------------------------------------
! Added rsync command line options --acls --xattrs to
enable acls and xattrs on rsnapshot run
1.5.0 stable 2020-02-03
----------------------------------------------
! Fixed switching to verbose level 4 if lower than 4
and report mail activated
1.4.9 stable 2020-01-22
----------------------------------------------
+ Added my patches to rsnapreport.pl
- Divide by 1048576 to get file sizes MB
- Format of file sizes changed to three decimal digits
- Fixed detection of rsync command line
1.4.8 stable 2020-01-22
----------------------------------------------
* Updated to rsnapshot 1.4.3
with sysconfdir=/etc
1.4.7 stable 2018-09-27
----------------------------------------------
! Added nfs to hint on filesystem types in exp check file
1.4.6 stable 2018-08-28
----------------------------------------------
* Replaced on by to on mount error output
+ Added "View log file" to menu
1.4.5 stable 2018-08-27
----------------------------------------------
* Replaced "_on_" by " on " on mount error output
1.4.4 stable 2018-08-26
----------------------------------------------
* Added missing newline at end of menu file
1.4.3 stable 2018-08-25
----------------------------------------------
* Additions to documentation
1.4.2 stable 2018-08-23
----------------------------------------------
* Additions to documentation
1.4.1 stable 2018-08-21
----------------------------------------------
! Corrected status flag to stable in info file
1.4.0 stable 2018-08-21
----------------------------------------------
* Changed status to stable
1.3.11 testing 2018-08-11
----------------------------------------------
+ Added some little configuration checks in new
sub menu "Check configuration"
+ Added /usr/bin/rsnapshot-copy for copying to
snapshots to a new root directory
+ Additions to documentation
1.3.10 testing 2018-08-09
----------------------------------------------
+ Command line for run with report enabled is now put
together in wrapper script /var/install/bin/rsnapshot
not layed down in cron file
+ install.sh: check for olf style fashioned command
line in cron file when report is enabled
* Changed checks for cron jobs when manual cron
settings are activated looking only for levels
! Fixed setting of minimum verbose level to 4 if report
is enabled
1.3.9 testing 2018-08-08
----------------------------------------------
! Set errorlevel to 1 on mount error
1.3.8 testing 2018-08-08
----------------------------------------------
* More enhancements to documentation
! Fixed checks for cron jobs when manual cron
settings are activated
1.3.7 testing 2018-08-07
----------------------------------------------
* Enhancements to documentation
1.3.6 testing 2018-08-07
----------------------------------------------
* Improved documentation and comments on mounts
1.3.5 testing 2018-08-03
----------------------------------------------
+ Added nfs as file system to mounts
+ Added mailx package requirement
1.3.4 testing 2018-08-02
----------------------------------------------
! Patched rsnapreport.pl:
- Divide by 1048576 to get file sizes MB
- Format of file sizes changed to three decimal digits
1.3.3 testing 2018-08-02
----------------------------------------------
! Patched rsnapreport.pl:
- Fixed detection of rsync command line (typo)
1.3.2 testing 2018-08-02
----------------------------------------------
! Patched rsnapreport.pl:
- Fixed detection of rsync command line
1.3.1 testing 2018-08-01
----------------------------------------------
* Replaced rsnapreport.pl by newer version from project page
* Replaced rsnapshot by newer version from project page
1.3.0 testing 2018-08-01
----------------------------------------------
* Changed status to testing
+ Added patch information to rsnapreport.pl
1.2.13 unstable 2018-08-01
----------------------------------------------
! Patched rsnapreport.pl:
- "Number of regular transferred files"
is detected correctly from rsync --stats output
- RegExp allowing , or . in files, files_tran, file_size
and files_tran_size
- Filter out , or . from number before dividing
1.2.12 unstable 2018-07-30
----------------------------------------------
+ New config parameters:
RSNAPSHOT_REPORT_FROM
! Set minimum verbose level to 4 if report is enabled
1.2.11 unstable 2018-07-29
----------------------------------------------
* Fix breakups in waitloop of /var/install/bin/rsnapshot-du
1.2.10 unstable 2018-07-29
----------------------------------------------
* Code cleanup in /var/install/bin/rsnapshot-du
1.2.9 unstable 2018-07-29
----------------------------------------------
+ New menu entry "View usage in rsnapshot backup directory"
* Changes to documentation
1.2.8 unstable 2018-07-28
----------------------------------------------
! Fixed /etc/rsnapshot.conf introduced in 1.2.7
1.2.7 unstable 2018-07-28
----------------------------------------------
+ New config parameters:
RSNAPSHOT_VERBOSELEVEL
RSNAPSHOT_LOGLEVEL
RSNAPSHOT_REPORT
RSNAPSHOT_REPORT_TO
+ Added rsnapreport.pl
+ Different cron commands wether report is active or not
+ Check if verboselevel is >=3 if report is activated setting
to 3 if value is <3
+ Report deactivated if no mail package found
+ Added rsync options to /etc/rsnapshot.conf including the defaults
if report is activated
+ Additions to documentation
! Added help entry for RSNAPSHOT_MANUAL_CRON_CONFIG
+ Added some more options to logrotate file from suse settings
1.2.6 unstable 2018-07-22
----------------------------------------------
+ Added "Show cron file" to menu
+ Additions to documentation
1.2.5 unstable 2018-07-21
----------------------------------------------
! Typos in variable names in /var/install/config.d/rsnapshot.sh
1.2.4 unstable 2018-07-21
----------------------------------------------
! Typos in comments of parameters in configuration file
+ New config parameters:
RSNAPSHOT_MANUAL_CRON_CONFIG
+ Additions to documentation
1.2.3 unstable 2018-07-20
----------------------------------------------
+ New config parameters:
RSNAPSHOT_DAILY_BACKUPS_TO_KEEP
RSNAPSHOT_WEEKLY_BACKUPS_TO_KEEP
if set to 0 the level is deactivated
! Remove /etc/rsnapshot.conf if START_RSNAPSHOT=no
* Remove /etc/rsnapshot.conf if all levels are deactivated
1.2.2 unstable 2018-07-19
----------------------------------------------
* Allow to deactivate monthly backup level also
fixing a problem if correspondig value is set to 0
1.2.1 unstable 2018-07-19
----------------------------------------------
* Allow to deactivate hourly backup level
1.2.0 unstable 2018-07-18
----------------------------------------------
+ New config parameters:
RSNAPSHOT_BACKUP_TO_DIR_MOUNT_IDENT
RSNAPSHOT_BACKUP_TO_DIR_MOUNT_BACKUPDIR
RSNAPSHOT_BACKUP_x_DIR_MOUNT_BACKUPDIR
* Mount error output now showing medium and mountpoint
! Fixed check file; columns OPT_VARIABLE and VARIABLE_N
for the new mount options
1.1.1 unstable 2018-02-27
----------------------------------------------
! Fixed missing closing ")" in command substitution
in preinstall.sh
* Changed system tag to eisfair-noarch
1.1.0 unstable 2017-12-11
----------------------------------------------
+ Mounting external drive as backup target
(file systems: ext3 and ext4)
+ Mounting external drive or cifs path as
backup source
(file systems: ext3, ext4 and cifs)
+ New config parameters for mounting source
and target
+ New config parameters:
RSNAPSHOT_BACKUP_TO_DIR_MOUNT
RSNAPSHOT_BACKUP_TO_DIR_MOUNT_SOURCE
RSNAPSHOT_BACKUP_TO_DIR_MOUNT_FS
RSNAPSHOT_BACKUP_TO_DIR_MOUNT_OPTIONS
RSNAPSHOT_BACKUP_x_DIR_MOUNT
RSNAPSHOT_BACKUP_x_DIR_MOUNT_SOURCE
RSNAPSHOT_BACKUP_x_DIR_MOUNT_FS
RSNAPSHOT_BACKUP_x_DIR_MOUNT_OPTIONS
RSNAPSHOT_BACKUP_x_TO_DIR
+ Additions to help file and documentation
* Changed status to unstable
1.0.0 stable 2016-04-23
----------------------------------------------
! Removed /etc/logrotate.d/rsnapshot because
it is created during installation/update
0.2.0 testing 2016-04-18
----------------------------------------------
* Reworked scripts and package structure
to fulfill eisfair packaging rules
0.1.1 testing 2016-04-15
----------------------------------------------
+ New config parameter: RSNAPSHOT_CREATE_ROOT
* sysconfdir set to /etc
0.1.0 testing 2016-04-14
----------------------------------------------
* Updated to rsnapshot 1.4.2
with sysconfdir=/etc
+ Added package require for rsync
0.0.2 unstable 2016-04-12
----------------------------------------------
! Path to cron.sh corrected
0.0.1 unstable 2016-04-12
----------------------------------------------
- Initial Release
Port of eisfair-2 package by Alexander Dahl
to eisfair-1
+ Added log rotation