Content
Dateianzeige für pcmcia (2.8.0)
usr/share/doc/pcmcia/pcmcia.txt
Das PCMCIA-Paket
Die Einleitung
eisfair unterstuetzt PCMCIA, die Einbindung erfolgt ueber udev.
Das Menue im Setup-Programm
Das Menue im Setup-Programm ist wie folgt aufgebaut:
x. System administration
x. Hardware administration
x. PCMCIA administration
1. View documentation
2. PCMCIA debug tools
1. ls
2. insert
3. eject
4. suspend
5. resume
6. reset
7. info
8. status
9. config
10. ident
Die Konfiguration
Eine weitere Konfiguration ist hier nicht erforderlich.
------------------------------------------------------------------------------------
PCCARDCTL(8) System Manager's Manual PCCARDCTL(8)
NAME
pccardctl - PCMCIA card control utility
lspcmcia - display extended PCMCIA debugging information
SYNOPSIS
pccardctl [-V] [-v ...] command [socket]
lspcmcia [-V] [-v ...] [socket]
DESCRIPTION
pccardctl is used to monitor and control the state of PCMCIA sockets. If a
socket number is specified, the command will be applied to just one socket;
otherwise, all sockets will be affected.
If pccardctl is executed by root, all commands are available. If it is
executed by an unpriviledged user, only the informational commands are
accessible.
lspcmcia is an alias for pccardctl ls, provided for convenience.
COMMANDS
status
Display the current socket status flags.
config
Display the socket configuration, including power settings, interrupt
and I/O window settings, and configuration registers. --not yet imple-
mented
ident
Display card identification information, including product identifica-
tion strings, manufacturer ID codes, and function ID codes. Not yet
implemented for cardbus cards. Use lspci instead.
info
Much like the ident command, but its output is formatted as a series of
Bourne-stype shell variable definitions for use in scripts. Not yet
implemented for cardbus cards.
ls Display extended debugging information about the PCMCIA sockets and
devices present in the system.
suspend
Shut down and then disable power for a socket.
resume
Restore power to a socket, and re-configure for use.
eject
Notify all client drivers that this card will be ejected, then cut
power to the socket.
insert
Notify all client drivers that this card has just been inserted.
OPTIONS
-V Show version information and exit.
-v Increase the verbosity of the ls command. Giving this option twice
increases verbosity further.
AUTHOR
Daniel Ritz - daniel.ritz@gmx.ch
based upon the original cardctl man page by
David Hinds - dahinds@users.sourceforge.net
pcmciautils 2005/10/22 PCCARDCTL(8)
------------------------------------------------------------------------------------
Copyright (c) 2008-2018 Holger Bruenjes, holgerbruenjes(at)gmx(dot)net